Use and Care Manual

17
Step 31B: Insert Top Panel
102GW
102
Slide the roller into the horizontal track where it is wide enough to put the
roller as shown. You may have to angle it in.
3
Top
Section
Slide the roller through the track so it lines up with the top
track. Attach the top fi xture to the top section using 1/4”
sheet metal screws.
4
1/4” Sheet Metal
Screw
2
1/4” Sheet
Metal Screws
Top
Fixture
Roller
Place a roller inside of a top fi xture.
2
Top Fixture
1
Roller
1