Use and Care Manual

17
Step 32A: Extension Spring Assembly
106GW
106
Attach pulley with a 3/8” x 1-1/2” bolt and hex nut on
angle which attaches horizontal track to fl ag angle.
Repeat this step for opposite side of door.
1
3/8” Hex Nut
3/8” x 1-1/2”
Bolt
Pulley
Clamp locking pliers
to back leg of track
REVERSE SIDE
With a minimum of two people, raise door
to fully open position.
2
Secure the door fi rmly at both sides
with locking piers. Connected to the
track as shown.
3
Pulley
2
3/8” x 1-1/2” Bolt
and Hex Nut
2