Use and Care Manual

17
Step 30D: Horizontal Track
99GW
99
3/8” x 3/4”
Carriage Bolt
Have another person hold the end of the
left horizontal curve track. Fasten the front
of the track to fl ag angle with (2) 1/4” x
5/8” track bolts and nuts. Always place
heads of bolts to inside of the track. This
will prevent rollers from striking bolts.
7
Fasten angle (attached to horizontal curve
track) to fl ag angle with 3/8” x 3/4” carriage
bolt and nut. Always place heads of bolts
on same side as the door sections. This will
prevent door from striking bolts.
8
Flag Angle
3/8” Nut
1/4” Nut
1/4” x 5/8”
Track Bolts
Vertical
Track
Left Horizontal
Curve Track
Right Horizontal
Curve Track
1
3/8” x 3/4” Carriage
Bolt and Hex Nut
2
1/4” x 5/8” Track
Bolt & Hex Nut
4
HOLD UP END OF
TRACK OR USE
ROPE PROVIDED
Left Horizontal
Curve Track
1
Repeat for right horizontal curve track.
9