User's Manual

www.soiltechwireless.com
5
placed horizontally, with the Humidity Sensor Cover facing down.
Some suggested planting strategies:
- In pivot irrigated fields, plant multiple units in a row parallel to the pivot (as illustrated
in the image below) and then take an average reading of the row before the pivot runs
over those devices in order to guide irrigation decision making.
- plant devices in different parts of the field that have different soil textures (our app can
help users determine soil type at any given location)
- plant devices at high spots or low spots in a field.
- plant devices in historically dry or wet areas in the field.
In Storage
Before placing the unit in a cellar or storage facility, users should remove the Humidity
Sensor Cover in order to allow air to flow into the device via the laser holes and provide
a more accurate reading.
If placing the Sensor into a storage facility, users should take note of its location since
GPS signals are not reliable indoors.
Battery and Charging
The Soiltech Sensor can be charged using the supplied USB cable. To charge to 100%
from 0% takes approximately 12 hours.
When charged to 100%, the Sensor has a life-cycle of approximately 11 months based
on normal usage. Frequent use of Bruise Mode or Tracking Mode will drain the battery
significantly faster, since the device will be reporting and using GPS positioning more
frequently. Therefore, users are advised to monitor
Technical Support
We are here to help! If you encounter any difficulties in using the device, please contact
your local dealer or contact us directly at [e-mail]. Please make note
of the serial number or account name when seeking technical support.
FCC STATEMENT
§ 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.