Instructions

español english français portuguese italiano

General appearance

Installation

• Install your stove in the sizes shown in the gure.

• Make sure the vents are open.

• Make sure the place where you install the stove is made of heat-

resistant material. Do not place it on plastic and similar materials Make

• Make sure the gas installation is proper.

• Preparation of the installation place as well as gas installation is for

responsibility of the product.

• The rules set forth in the applicable local standards regarding gas

should be observed during installation of the product.

• Damaged products may pose danger for your safety.

• Any operation on the gas equipment and systems should be performed by authorized and

competent persons. The product is not equipped with a system for evacuation of the gases that

may form after combustion.

• The product should be installed and connected as per the applicable installation regulations.

Requirements related to ventilation should be specially observed.

Connections

Property damage!

Do not use the cover, gas hose and/or gas control switches to carry or move the product.

Gas Connections

Any operation on the gas equipment and systems should be performed by authorized and competent

persons. Prior to installation, make sure the local distribution conditions (gas type and gas pressure) are

compliant with the settings of the product.

A. Strong burner

B. Normal burner

C. Auxiliary burner

D. Upper grill

E. Body

F. Control switch