Datasheet

29
Part #: EL-01
Open: 7. 5”
Blade: 3.4” x .120”
Weight : 3.3 oz.
Steel: AUS-8 Stainless
Rc. 57-58
Finish: Satin Polish
Edge: Straight
Handle: GRN
Comes With: Pocket Clip,
Wire Strippers
Part #: FF-01
Open: 7. 5”
Blade: 3” x .125”
Weight: 4.3 oz.
Steel: 8Cr13MoV Stainless
Rc. 52-54
Finish: Bead Blasted
Edge: Straight
Handle: GRN
Comes With: Pocket Clip, Pencil
Sharpener, Level,
Wire Stripper,
Lucky Nail
Kilowatt
Get ‘charged up’ with the Kilowatt, the first working theme
knife designed for the electrician, homeowner, contractor,
or anyone who might need to strip wire in a pinch. Three
separate systems address wire from fine multi strand all the
way up to cable. There is a stripper bar for wire sizes of 10-22,
an adjustable spring-loaded UTP/wire stripper in the back, and
just in case... our patent pending hole stripper that uses the
main blade. Schematic grips, insulator thumb stud, and a blade
with receptacle engraving are signatures that make this a very
unique liner lock knife.
Contractor 2
×
4
The Contractor 2x4 breaks ground with a whole different
framework! One of the new breed of thematic knives
originated by SOG, this knife is no apprentice. Open or close
the blade and see the circular saw turn or rotate the saw
and open the blade. Whether you are a contractor, know a
contractor, or wished that you didn’t... the 2x4 will help on
the job... whatever that might be. How many times have you
wished to sharpen a pencil without having to walk back in the
house? Or try and get that picture level without a level? Want
to strip a wire real quick? No worries. Use the patent pending
strippers in the handle. Oh yeah, if you ever need that one last
lucky nail, we have that too! What to do to drive that nail
home... we can’t help you there, at least not yet.
Wire Stripper Bar for
10-22 AWG Wire
Adjustable Spring-Loaded
UTP/Wire Stripper
Built-in Bubble Level
Wire Stripper