Instructions / Assembly

Safety Information 02
04
05
06
Warranty 03
11
13
14
14
12
Warning:
Kindly turn off the power
when connecting cables.
WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock,
this fan is NOT suitable for use with solid-state speed
controls.
WARNING: To avoid possible electrical shock, make
sure that the electricity is turned off at the main power
box before starting work. If you feel you do not have
enough electrical wiring knowledge or experience,
contact a licensed electrician.
WARNING: Electrical diagrams are for reference only.
Optional use of any light kit shall be UL-listed and
marked suitable for use with this fan
WARNING: To reduce the risk of fire, electrical shock
or personal injury, ensure that the fan mounting
bracket is supported directly from the building
structure or the outlet box marked “Acceptable for
Fan Support of 35 lbs. (15.9 kg) or less”. Use only
the screws provided with the outlet box.
WARNING: Do not short-circuit,disassemble, heat
up, connect improperly, or dispose of used batteries
in fire.Do not recharge or mix batteries with used or
other battery types. Immediately remove
used batteries
WARNING: Chemical Burn Hazard. Keep batteries
away from children. This product contains a lithium
button/coin cell battery. If a new or used lithium
button/coin cell battery is swallowed or enters the
body it can cause severe internal burns and can
lead to death in as little as 2 hours Always
completely secure the battery compartment.If the
battery compartment does not close securely stop
using the product. remove the batteries and keep
it away from children. If you think batteries might
have been swallowed or placed inside any part
of the body. seek immediate medical attention
WARNING: a) The cells shall be disposed of
properly including keeping them away from children;
and b) Even used cells may cause injury.tion
WARNING: Do not test the fan before affixing the
blades. The DC motor needs a load to rotate properly.
Affixing blades and then testing the fans.
Connecting Smart Systems
15