Instructions / Assembly

13
11
Slide the balancing clip on the trailing edge
of any blade, halfway between the holder
and tip. Run the fan to check the wobble.
If the wobble persists, repeat with each
blade, noting which one most reduced
the wobble.
Stick the adhesive-backed balancing weight
on the top center of the blade directly in
line with the balancing clip.Add more weight
if needed to get a smooth-running fan.
Adjusting and balancing your ceiling fan blades
Slide the clip in small increments away
from the center of that blade. Move the
clip, operate the fan, then move it again
until you eliminate as much wobble as
possible.