User`s guide

If you know and trust the detected application, click Allow.

If you want to immediately close the application, click OK.

Select the Remember this action for this application check box before making

your choice and BitDefender will take the same action for the detected application

in the future. The rule that is thus created will be listed in the Active Virus Control

configuration window.

To configure Active Virus Control:

1. Open BitDefender, click Options in the upper-right corner of the window and

choose Expert View.

2. Go to Antivirus > Shield.

3. Click Advanced Settings.

4. Go to the AVC tab.

5. Select the corresponding check box to enable Active Virus Control.

6. Drag the slider along the scale to set the desired protection level. Use the

description on the right side of the scale to choose the protection level that better

fits your security needs.

Adjusting the Aggressiveness Level

To configure the Active Virus Control protection level:

1. Open BitDefender, click Options in the upper-right corner of the window and

choose Expert View.

2. Go to Antivirus > Shield.

3. Click Advanced Settings.

4. Go to the AVC tab.

5. Drag the slider along the scale to set the desired protection level. Use the

description on the right side of the scale to choose the protection level that better

fits your security needs.

Configuring the Response to Malicious Behavior

If an application exhibits malicious behavior, you will be prompted whether to allow

or block it.

To configure the response to malicious behavior:

1. Open BitDefender, click Options in the upper-right corner of the window and

choose Expert View.

2. Go to Antivirus > Shield.

3. Click Advanced Settings.

Antivirus Protection

BitDefender Total Security 2011