User`s guide

23.2. Restoring Locally Backed-Up Data
The Local Restore Wizard helps you restore data that you backed up on a local
storage medium. At the end of this process, you will be able to back your files up
on the spot or schedule the product to back them up at a later moment.
Note
Before restoring any data, make sure that the device where you backed the data up
is available. Depending on the device you used, you may need to take one of these
actions:
● Insert the backup USB stick into a USB port.
● Insert the backup CD/DVD into the drive.
● Check if you can connect to the network location or FTP server where the backup
is stored.
To start the wizard, open BitDefender and, depending on the user interface view
mode, proceed as follows:
Intermediate View
Go to the File Storage tab, click Backup Locally in the Quick Tasks area on
the left side of the window and select Local Restore.
Expert View
Go to Backup and click Local Restore.
You can navigate through the wizard using the Next and Back buttons. To exit the
wizard, click Cancel.
1. Welcome Window
2. Choose where to Backup from
Here you can select a location where you want to restore files from.
After selecting an option, click Choose location and select the backup file that
you want to restore.
3. Choose the Restore Location and Files
Here you can choose which specific files to restore and where to restore them
to.
If you want to restore data to another location or specific files only, select the
location and data by clicking the corresponding button.
To avoid overwriting the existing file when restoring, clear the Overwrite existing
files when restoring check box.
4. Summary
Here you can review the restore job settings and start the restoring process.
Backup
140
BitDefender Total Security 2011