User`s guide

▸ If you want the rule to apply to UDP, select UDP.
▸ If you want the rule to apply to a specific protocol, select Other. An edit field
will appear. Type the number assigned to the protocol you want to filter in the
edit field.
Note
IP protocol numbers are assigned by the Internet Assigned Numbers Authority
(IANA). You can find the complete list of assigned IP protocol numbers at
www.iana.org/assignments/protocol-numbers.
⚫ Events. Depending on the selected protocol, choose the network events the rule
applies to. The following events may be taken into account:
DescriptionEvent
Preliminary exchange of standard messages used by
connection-oriented protocols (such as TCP) to establish a
Connect
connection. With connection-oriented protocols, data traffic
between two computers occurs only after a connection is
established.
Flow of data between two computers.Traffic
State in which an application monitors the network awaiting to
establish a connection or to receive information from a peer
application.
Listen
⚫ Adapter Types. Select the adapter types the rule applies to.
⚫ Action. Select one of the available actions:
DescriptionAction
The specified application will be allowed network / Internet access
under the specified circumstances.
Allow
The specified application will be denied network / Internet access
under the specified circumstances.
Deny
Configuring Advanced Parameters
The Advanced tab of the configuration window allows configuring advanced rule
parameters.
Firewall
226
BitDefender Internet Security 2010