Installation Guide

STEP 2: Mount Railing System
(sold separately in Bottom-Only 2-Pack Kit)
Mount polystyrene strips and vinyl rail extrusions per
the instructions included with the Split Panel Bottom-
Only 2-Pack Kit (sold separately).
STEP 3: Insert Bottom Wall Panels
(sold separately in Bottom-Only 2-Pack Kit)
Position bottom wall panels per the instructions
included with the Split Panel Bottom-Only 2-Pack Kit
(sold separately).
STEP 4: Insert Top Wall Panels
Postion top wall panel between the top rail and chair
rail.
STEP 5: Tuck Fabric Edges
Once all panels are in place and adhesives have cured,
tuck in the fabric edges along the vinyl rails.
Using the installation roller included, seat the fabric in
the vertical vinly rails along each edge. Work from top
to bottom using short up and down strokes.
STEP 6: Add Trim (optional)
Add base board, chair rail and/or crown moulding (not
included) to complete your space.
Sample Finished Space With Split Panels
Installation Instructions
Split Panel Top-Only 2-Pack Kit