User Manual

66 | APOLLO CENTRAL
Loading Plug-ins
Load or remove a plug-in from the Unison slot:
1. Select the track
2. Click Shift + Select Track 1 to select "Select
Unison Plug-in"
3. Use the "Volume/Select" knob to scroll
through the list. Choose "None" if you wish to
remove the current plug-in.
4. Conrm your choice with "Solo/OK" or cancel
with "Mute/Cancel"
Load or remove a plug-in from the 4 normal insert
slots:
1. Select the track
2. Click Shift + Select Track 2 to open the selec-
tion menu for insert #1. Use "Select Track
3", "Select Track 4", and "Select Track 5" for
inserts 2-4.
3. Use the "Volume/Select" knob to scroll
through the list. Choose "None" if you wish to
remove the current plug-in.
1. Channel view (basic mix functions)
2. UA 1176
3. Precision Equalizer
4. ...back to Channel view.
e On-Screen Display remembers the last selected
position so that it is easy to jump between dierent
plug-ins on dierent tracks.
Quick Access to Channel Settings
If you're in Insert View you can quickly access the
channel settings by holding "Shift" and get access
to:
• Preamp settings (Input Gain, Phase Invert,
Low Cut) if applicable
• Channel settings (Volume, Solo, Mute, Pan)
• e two rst sends (usually Aux 1 and Aux 2).
• Current insert's Power button (Shift + Phase
Inv/Bypass)
• Open/Closing the plug-in GUI (Shift + Fil-
ters to Compressor)
• Previous/Next page for multi-page plug-ins
(Shift + Page Up/Down)
• Recording monitor, record inputs with or with-
out UAD plug-ins. (Shift + Order)
Multiple pages
If a plug-in needs multiple pages of controls, press
Shift + Page Up or Shift + Page Down to jump
between pages. A plug-in has multiple pages if the
"PREV NEXT: Page 1/x" option is visible in the top
left corner of the On-Screen Display.