User Manual

CONSOLE 1 USER’S GUIDE | 65
Input Gain
Pan
Solo
Mute
Volume
By pressing Shift you can also access
All 6 Sends
Recording monitor (record with our without UAD
plug-ins)
Unison enabled tracks have the same parameters, as
well as the parameters from the Unison plug-in.
Tracks without preamp the same parameters, except
the input parameters (Low Cut, Phase Invert,
Input Gain).
Aux tracks don't have Solo, Pan or Sends, but you
get the ability to control Mono instead of Solo.
Press Shift and you can access
HP Level
Line 3/4 Level
Pre/Post
Controlling Plug-ins ("Insert View")
If a channel has inserted plug-ins, access the plug-
in's settings by repeatedly pressing the channels
track selector until you have selected the plug-in. If,
for example, channel 1 has both the UA 1176 and
Precision Equalizer inserted, pressing "Select Track:
1" on the hardware will toggle through:
Basic Mixing ("Channel View")
When you're in the "Channel" view (the rst yellow
slot at the top of the Console 1 On-Screen Dis-
play), you can access the basic channel settings.
By selecting a track from the either the Console
1 hardware or the UAD Apollo application, its
basic functions (Volume, Pan, Solo, Mute) become
directly available from the Console 1 hardware.
Sends
Access the channel's sends by pressing "Shift"
on the Console 1 hardware. All six sends become
available on Drive/Send 1, Character/Send 2, Pan/
Send 3, Attack, Release, and reshold. Even if your
hardware only supports a limited number of sends,
Apollo Central will always show all six.
Preamp Settings
If the channel has preamp settings (Input Gain,
Phase Invert and Low Cut) these are also immedi-
ately accessible from the hardware.
Unison Preamps
Inserting a plug-in in the Unison slot will make its
settings available from the channel view, together
with the channels "normal" parameters (Volume,
Pan, etc).
Controlling Track Parameters
Select the track and make sure you're in rst slot,
indicated with "Channel" or the name of the Uni-
son plug-in inserted as a preamp. For input tracks,
you can control:
Low Cut
Phase Invert