User Manual
ing and adjusting the Drive, Drive Charac-
ter and Pan/Balance knobs.
When you click you will see on the On-
Screen Display that the knobs change function.
DAW Track Selection
lets you select a track
in Console 1 by selecting it in your DAW, or vice
versa.
Please note that whenever the DAW Control is enabled,
Console 1’s internal Solo, Mute and Solo Safe
functionality gets disabled. A saved session that is using
Solo and Mute and is opened with DAW Control will
turn o and disable the internal Solo and Mute and
let Console 1 control the DAW’s Solo and Mute. You
can always go back by disabling DAW Control from the
Setup menu in the plug-in.
Disabling DAW Integration
It is possible to turn o the DAW integration
features, even if we don’t recommend it. Not all of
these features are available in all DAWs.
You do this by clicking Setup in the plug-in win-
dow (not in the On-Screen Display!) ese settings
are global and will aect all instances of the plug-in
in all DAWs.
Use DAW Control is feature turns on the
Integrated DAW Control,
with Console 1 control over
the DAW’s fader volume, pan,
solo, mute and sends.
Use DAW Track
Selection Let Console 1 select the track
in the DAWs mixer, and vice
versa.
Use DAW Track Name Fetch the track name from the
DAW
Use DAW Track
Number Fetch the track number from
the DAW.
If you are working with DAW project templates and
always want your sessions to look the same in Console 1 it
can be helpful to turn o “Use DAW Track Number”