User Manual

56 | DAW INTEGRATION
Meter Levels
When   is activated, the output
meters will display the levels after the DAW’s
fader and pan has been applied. is level is ap-
proximated, and if you have processing between the
Console1 and the DAW’s fader, the metering can
be incorrect.
If you want to see the output levels coming out of
Console 1, without the DAW’s volume and pan,
press .
With Integrated DAW Control, you will adjust the DAW’s Volume,
Solo, Mute and Pan instead of Console 1’s built-in functions. Send
levels are adjusted by holding Shift while changing Drive, Char-
acter and Pan. If you want to change Console 1’s internal output
volume, you can press Shift while adjusting the Volume knob.
Controlling Send Levels
You can access the track’s three rst sends by press-
Track Name
With automatic track names, the name you set on
your track in your DAW gets automatically trans-
ferred to Console 1. is feature is available in all
hosts that supports  , with the addi-
tion of Pro Tools, that only supports  .
Integrated DAW Control
With the integrated DAW Control you are able to
control the DAW’s Fader Volume, Pan, Solo, Mute
and Send Levels directly from your Console 1
hardware. Select a track in your DAW and the same
track will get selected in Console 1, change the
Output Volume in Console 1, and the correspond-
ing track’s fader will move.
Integrated DAW Control is currently available in
the latest versions of Presonus Studio One and
Cakewalk SONAR.
Volume, Solo and Mute
  is automatically turned on for
DAWs that support it. With   ena-
bled, the Output Volume, Pan, Solo and Mute will
automatically control the corresponding functions
in your DAW.
If you press  on your Console 1, you will be
able to control Console 1’s internal Output Volume
instead of the DAW’s functions. is can be use-
ful if you want to overdrive the output section in
Console 1, or want to set basic levels with Console
1, and use the DAWs faders for automation and
level riding.
Console 1’s internal Solo and Mute will get disa-
bled, and the hardware’s Solo and Mute buttons
will now control the Solo and Mute in the DAW.