User Manual

20 | GETTING STARTED
Ratio Sets the compressor’s ratio.
Attack Sets the compressor’s attack
time.
Parallel Dry/Wet Sets the relative level of the
compressed and uncompressed
signal.
Release Sets the compressor’s release
time.
Threshold Sets the compressor’s thresh-
old.
Output Section
Drive/Send 1 Sets the level of the Drive/
distortion function. Turn fully
counterclockwise to bypass.
Press and hold Shift to adjust
Send 1 level in DAW’s with
Integrated DAW Control.
Drive Character/
Send 2 Sets the Drive/distortion
character. Press and hold
Shift to adjust Send 2 level in
DAW’s with Integrated DAW
Control.
Pan/Send 3 Sets the left-right placement
of mono-to-stereo tracks,
or the balance between left
and right channels for stereo
tracks. Pan is disabled for
Compressor Section
Compressor activation Activates or bypasses the com-
pressor section.
Gain Reduction meter Displays the gain reduction
caused by the compressor.
Gain Reduction meterCompressor activation