Manual

| 9
2
Gettingstarted
In order to install the required software and activate your license, rst make sure your
computer has internet access. Use any browser to visit the page
www.softube.com/console1-install
Here, you will be guided through all the necessary steps. You will be asked to enter the
unique license code printed on the Quick Start guide that is enclosed in the Console1
shipping box.
Setting Up Your First Console1 Session
When you have gone through the registration process on Softube’s web site, you are
ready to set up your basic Console1 session. You may want to save this as a template ses-
sion in your DAW, so you will not have to do this for every new piece of music you start
working on. Please refer to your DAW’s manual on how to save a template session, as
well as any other steps mentioned below that refer to actions in your DAW.
1. Connect the Console1 hardware to an unoccupied USB port on your computer. e
Softube logo in your computer’s control panel will turn from grey to black.
2. Launch your preferred digital audio workstation (DAW) application. Console1 runs
with any host that supports VST2, VST3, AAX and Audio Units plug-in formats
3. Launch an empty session in your DAW.
4. Insert the Console1 plug-in on as many tracks as you like. We recommend inserting
it on all single tracks, aux channels and buses.
e audio on any track where you have inserted the Console1 plug-in will now be
Nobilis Audio, Germany