Manual

CONSOLE 1 USER’S GUIDE | 45
fer of track number from the host to the Console 1
system, the track layout in the DAW does not auto-
matically get reected in Console 1. So if you work
in such a DAW and for example would like to move
track 25 so it’s placed after track 12 in your DAW, a
corresponding move does not occur in Console 1. If
you wish to have a consistent track layout between
the DAW and Console 1, you can follow these steps
to manually rearrange the Console 1 tracks:
1. Hold Shift and press Track Selector 20/Set-
tings.
2. Use the Volume/Select knob to scroll down to
 . Press Solo/OK to select
that option.
3. Select the track you want to move using the
track selector buttons.
4. Select where you want to put it, by using the
track selectors.
Example
Say you have 7 tracks, A to G:
A B C D E F G
You add an eighth track, which by default is placed
on the lowest available position:
A B C D E F G X
If you move it to the 4th position, the other tracks
will be moved upwards:
A B C X D E F G
Auto Solo Track on Rename/
Rearrange
Set this to  if you want to solo the track that’s
currently being renamed or moved. is is very
useful if you insert Console 1 on all tracks on an
Renaming/Rearranging
Tracks
As mentioned in “Setting Up Your First Console1
Session” on page 9, some DAW hosts do not support
automatic transfer of track name and number. Some
hosts, such as Pro Tools and Logic Pro, only sup-
port automatic transfer of track name but not track
number. In these cases, the user can manually set
the correct name to the Console 1 tracks, and place
them on the preferred track position.
Activate “Auto solo track on rename/rearrange” and start
playback before you start renaming tracks. This will speed
up the process and help you avoid making mistakes.
Rename Tracks
Turn on “Auto solo track on rename/rearrange” and start
playback, before you start to rename tracks. It will help
you to avoid making mistakes.
1. Hold Shift and press Track Selector 20/Set-
tings
2. Use the Volume/Select knob to scroll down to
 . Press Solo/OK to select this
option.
3. Select the track you want to rename using the
corresponding Track Selector button.
4. Enter the track name you would like in the box
in the On-Screen Display and press OK.
5. Select another track to rename or press Cancel/
Mute if you are done.
Renumber/rearrange Tracks
In DAW hosts that do not support automatic trans-