Manual

CONSOLE 1 USER’S GUIDE | 43
Default Presets
Default presets are preset settings that are auto-
matically loaded when you load an entire Strip or a
plug-in into the Shape, EQ or Compressor sections
of Console 1. e user can create default presets,
which then override the factory default presets.
1. Hold Shift and press Preset/Save Preset.
2. If you want to create a default preset for the
entire channel strip, press Solo/OK. If you want
to create a default preset for a single plug-in or
section, select that section with its On/O but-
ton, and then press Solo/OK.
3. When prompted to save the le, name it De-
fault.c1preset and save it in the suggested
folder. Do not save it in at another location than
the suggested folder, as it will then not be found
by the system.
Example
e default preset for the entire XL9000K channel
strip should be called Default.c1preset and be
saved in the Presets/Channel Strip/SSL XL 9000
K-Series Console/ folder.
Example
A default preset for the Tube-Tech CL 1B should
be saved here: Presets/Compressor/Tube-Tech CL
1B/Default.c1preset.
You can for example create a default preset for the
SL4000E but with, say, the Tube-Tech CL 1B compressor
instead of the SL 4000 E.