Manual

CONSOLE 1 USER’S GUIDE | 39
Duplicate Track Settings
You can duplicate track settings and copy them
from one track to another—or several others. is
can be either the entire channel strip setting, or just
the Shape, EQ or Compressor settings.
1. Select the track you would like to copy from us-
ing the corresponding Track Selector button.
2. Press and hold both All and Group buttons.
A dialog window in the On-Screen Display
will inform you that you are about to copy the
channel strip settings of the selected track, and
prompts you to select the track to which you
would like to copy these settings.
3.
COPY TRACKS
Release Group+All to confirm. De-select tracks to abort.
Track 1’s EQ and Compressor will be copied
to track 2, 3 and 4.
A message window in the On-Screen Display
displays the current action.
Select the track (or tracks) you want to copy to
by pressing the corresponding track selector
button (or buttons), and release the All and
Group buttons.
If you change your mind during this process, simply
deselect the tracks you were copying to by pressing
the track selector buttons again. When you now
release the All and Group buttons, nothing will be
copied.
Duplicate Dierent Sections
In order to not copy the entire channel strip setting,
but just the settings of single eects sections:
1. Press and hold both the All and Group buttons.
2. When the dialog window opens, press the on/
o button next to the name of the section (or
sections) you would like to copy—for example
the Equalizer Activate button.
e dialog window now informs you that you are
about to duplicate the equalizer settings of the
selected track. You can select and duplicate any
combination of Shape, Equalizer and Compressor
to other tracks.
Only by duplicating the entire channel strip can you dupli-
cate the High/Low Cut settings and the Drive settings.