User manual

20
The Cable Test menu saves all tests, except when using ID
only remotes, to a le in internal memory with the extension “.tst”.
The Cable Test has two screens; a Detailed Results screen and
a spreadsheet-like Test List screen. Testing can be initiated from
either screen by pressing the Test button . When initiating
a test from the Test List Screen, only a summary of the results is
shown. If no test le is dened by the user, “UNTITLED1.TST” will
be used to save test results to. The test file name that is being used
appears in the title bar along with the current function, Cable Test.
To navigate from the Detailed Results screen to the Test List, touch
List
at the bottom of screen. The Test List will be displayed
with a highlighted cable test in the list which the Detailed Results
screen was displaying results for. To navigate from the Test List
to the Detailed Results screen, highlight a cable test in the list that
you would like to display the test details for and touch Select
at the bottom of the screen. To exit the Test List without making a
selection, press the Back button .
Before testing a cable, the list file should be selected or created
to save results. The cable type should be selected or created from
the cable type list and the cable name prefix and beginning index
number can be defined or kept as default. Each test performed will
use the currently selected test definition.
Note: All these test setup functions are on the Detailed Results
screen.
CABLE TEST OVERVIEW
Detailed Test Results Cable Test List