User manual

English

•PowerontheCableMaster800/850.

•Presstheenterbuttonorcabletestsoftkey.

•PresstheToneGeneratorsoftkey.

•TheCableMaster800/850willautomaticallyactivatethetonegeneratorupon

entering the tone generator menu.

•ConnectacabletoeithertheRJ45jackorcoaxconnectorlocatedonthetopofthe

CableMaster 800/850.

•ToswitchbetweenRJ45andcoax,pressthecoaxcablesoftkey

. Press the

soft key again to return to the RJ45 tone screen.

•Presstheupordownarrowbuttonstoselecttonecadences1thru4.

•Presstheleftorrightarrowbuttonstoselectwhichpinorpairtoplacethetone.

•Useanytoneprobealongsidethecableorattheendofthecabletohearan

audible tone.

ToneGenerator

T3 Innovation