User manual

Introduction
The LANEXPERT Inline Gigabit Network Analyzer is a handheld network
tool that features protocol analysis, packet capture, traffic generation,
cable testing and IPv4/IPv6 support. The LANEXPERT utilizes a color
touch screen interface to access one of the most complete suites of test
and analysis functions available in a portable test tool. The Inline Mode
allows users to non-intrusively monitor network traffic (10/100/
1000BaseTX) to identify protocols, port usage, VoIP statistics and network
utilization. The LANEXPERT can capture and store up to 10,000 packets
with user defined filters for detailed analysis in the field, downloaded over
the network or to a USB flash drive. Use either RJ-45 port to test Ping,
Link, Trace Route, DHCP and Discovery which will quickly identify network
problems. The LANEXPERT can generate up to 100% traffic loading in
1% increments to demonstrate network performance at various traffic
levels. A stress test that generates traffic and measures performance
metrics (per RFC 2544) is also provided. The stress test can be conducted
using the two independent ports on a single unit or used with a second
unit located remotely on a network. PoE tests include voltage and inline
current measurement to determine the actual power used by a powered
device. The LANEXPERT also tests cable for shorts, opens, split pairs,
reversed pairs, measures cable length and generates tones for cable
tracing.
This Guide
This guide introduces the analyzer’s features.
You can:
Read the entire guide beginning to end.
Skim through and stop when a topic interests you.
Use the table of contents and index to find specific information.
Read through Part I to familiarize yourself with the parts of the analyzer.
vix