User manual

4-28

Chapter 4

Analyze Network

Remote Access

Select the REMOTE ACCESS button in the Bottom Area. The Remote Access

Screen displays UDP Sessions and Pings received. The LANEXPERT IP

address is also shown here.

UDP SESSIONS describe the connection to another network device. The

LANEXPERT displays the IP address and the port number the packet

comes from. Also the LANEXPERT will tell if the link is Active or Inactive

and how many transmitted and received packets between the two devices.

PINGS RECEIVED displays what IP address sent the Pings and how many

pings received. Select CLEAR to clear collected data.

Once a Remote unit connects to the LanExpert, a green info message

appears stating “REMOTE SESSION STARTED“ which includes the remote

unit‘s IP Address.

NOTE: Select another Test button visible on the screen or by scrolling to

the right or left with the white arrows or select the Exit button.

Example Remote Access

Screen