User manual

4-18
Chapter 4
Analyze Network
Traffic Generate
Traffic Generate
Traffic generate relies upon getting data back from the remote end when
using LOCAL->REMOTE direction, and relies upon control frames in both
directions when using REMOTE->LOCAL direction. This means that
neither can quite reach 100% utilization if either:
a) the connection is using half duplex
b) using the REMOTE->LOCAL direction.
Select START to start the test and watch the actual frame and rate the
LANEXPERT uses. Select SETUP to change the TRAFFIC GENERATE
parameters.
NOTE: Select another Test button visible on the screen or by scrolling
to the right or left with the white arrows or select the Exit button.
Example Traffic Generate
Screen
Example Traffic Generate
Screen
NOTE: Performing high % utilization traffic generate when using DHCP
has no time left to negotiate a lease renewal.