User manual

4-11
Chapter 4
Analyze Network
Vitals - Good Frames
Bad Frames
BAD FRAMES are displayed in red if there are any found. They are
displayed in number of frames and percentage (of total received frames) of
bad unicast, multicast, and broadcast Ethernet frames received in relation
to the total frames. Select the outlined white box to show the breakdown of
bad frames. Select the filled box to hide the breakdown.
Good Frames
GOOD FRAMES are displayed in number of frames and percentage (of
total received frames) of good unicast, multicast, and broadcast Ethernet
frames received in relation to the total frames. Select the outlined white box
to show the breakdown of good frames. Select the filled box to hide the
breakdown.
Good Bytes
GOOD BYTES are displayed in number of KB of good multicast and
broadcast Ethernet bytes received in relation to the total bytes.
NOTE: Select another Test button visible on the screen or by scrolling to
the right or left with the white arrows or select the Exit button.
Total
avg/s - shows the average of frames and bytes collected per
second.
/1s - shows frames and bytes that were collected within the last
second. This will update every second.
/10s - shows frames and bytes that were collected within the last
10 seconds. This will update every 10 seconds.
/1m - shows frames and bytes that were collected within the last
minute. This will update every minute.
Total - shows all frames and bytes that were collected since the
link was established.
The TOTAL button in the Data Action Area is used to change how the
information is presented. The amount of Frames, Good and Bad frames
and Good Bytes collected will be presented in the time frame selected.
This function works in both the List and Chart mode.
The choices below are how the information can be presented: