User manual

Under Admin Account, allow the Admin to Erase profiles, saved data or the
entier memory. Select the START button next to either ALL PROFILES or
ALL SAVED DATA. A message stating “this function cannot be undone“
appears.
Select CONFIRM to confirm the requested secure erase. Once selected
the LanExpert returns to the Security Home screen and the respective
START button is now CONFIRM. Press the CONFIRM button to actually
perform the erase.
For the ALL MEMORY button, which is only available under Admin logon,
a message stating “this renders the unit inoperable“ appears and the
unit automatically powers down after CONFIRMED completion.
While erasing, the percentage completion is displayed to the right of the
respective START/CONFIRM button.
3-29
Setup
Security
Secure Erase
Chapter 3
Admin Account Accepted
Screen
NOTE: If ALL MEMORY is selected and Confirmed the LanExpert
beomes inoperable and will need to be returned to the factory for
Service. (Service fee will apply).
User #1 Name and Password
Screen
NOTE: Select another Setup button visible on the screen or by scrolling to
the right or left with the white arrows or select the Exit button.