User manual

3-21
Setup
Capture - Frame Types
Chapter 3
Capture frame types
Capture Screen 2
CAPTURE FRAME TYPES allows for the selection of one or a combination
for frame types detected. Select RFC894, STP, LLC and/or LLC/SNAP.
Capture VLAN frames
NOTE: Press the DOWN arrow on the right of the screen to scroll to the
next page of parameters.
CAPTURE VLAN FRAMES allows for the selection of one or a
combination of VLAN options. Select NON-VLAN, ANY and/or a specific
VLAN tag. Next to VLAN, the user can select or change the TAG number.
A numerical keyboard screen is displayed. Valid entries are 0 to 4095. If a
non-valid entry is chosen, an error message will appear. The screen will
then revert back to the keyboard to re-enter a valid number. The CLEAR
button removes the incorrect digits from the display. After selecting a valid
number, select ENTER to return to the CAPTURE VLAN FRAMES
parameters screen.