User manual

3-12
Setup
Ping / Trace - Timeout
NOTE: Press the DOWN arrow on the right of the screen to scroll to the
next page of parameters.
Timeout
TIMEOUT is the amount of time the LANEXPERT waits before a ping
response returns. There are two options, Default or Other. Default is 10s
(factory default). Other is a user-defined time in seconds. Select the time
field to display a numerical keyboard. A valid entry is 1 to 99. After
entering a valid number, select ENTER to return to the PING/TRACE
parameters screen.
Ping Trace Screen II
Ping Targets
PING TARGETS allows the user to select what the LANEXPERT will
PING. Select one target, or any combination of targets, from the list. The
options are Gateway, DHCP Server, IP Range (user defined), or up to
sixteen separate User Defined Targets (Ping List Entries). The Deselect
All button clears all the selected choices.
Gateway
GATEWAY allows for the pinging of the established gateway.
Chapter 3
DHCP Server
DHCP SERVER allows for the pinging of the established DHCP Server.