User manual

3-11
Setup
Ping / Trace
REPEAT determines the number of times to ping a device. Ping is a
network tool used to test whether a particular host is reachable across an
IP network. There are three options; Once, Count or Continuous. Select
the Count button then select the number field to the right to change the
parameter. This will display a numerical keyboard screen. Valid entries are
1 to 999. After entering a valid number, select ENTER to return to the
PING/TRACE parameters.
Repeat
Ping/Trace
To edit or view the parameters for the SELECTED profile, select the
PING/TRACE button.
MAX RATE is the maximum time between sending one ping to sending the
next. There are two options, Default or Other. Default is 1 second
(factory default). Other is a user-defined time in milliseconds. Select the
time field to display a numerical keyboard. A valid entry is 0 to 99999. After
entering a valid time, select ENTER to return to the PING/TRACE parameter
screen.
Max Rate
Ping /Trace Screen I
Chapter 3
Payload
PAYLOAD is the amount of data sent with the ping packet in bytes. There
are two options, Default or Other. Default is 50 bytes (factory default).
Other is a user-defined amount of bytes. Select the byte field to display a
numerical keyboard. A valid entry is 10 to 50000. After entering a valid
number, select ENTER to return to the PING/TRACE parameters screen.