User manual

3-8
Setup
Ports - IP Addess
IP ADDRESS parameters allow selection of Ipv4 and FIXED or DHCP. This
must match the network to which the LANEXPERT is being connected.
IP Address
NOTE: Press the DOWN arrow on the right of the screen to scroll to the
next page of parameters.
Chapter 3
NOTE: If INDEPENDENT mode is selected, Port 1 parameters will be
configured first, then Port 2 parameters will be available. The parameters
will be port identified for clarity.
Ipv4 - is a protocol type to be used for all transmitted packets
used by traffic generation, PING, DHCP and other tests.
FIXED allows the IP, Subnet, Gateway, WINS, DNS1, DNS2 and
DNS3 fields to be available to change. Selecting the button next
to the name displays a numerical keyboard to enter the desired
address. After entering the desired addresses, select ENTER to
return to the PORTS parameters screen.
DHCP causes the IP, Subnet, Gateway, WINS, DNS1, DNS2 and
DNS3 fields not to appear because they are unavailable for
change. These will automatically be assigned to the
LANEXPERT once a link is established with the DHCP server.
Ports Setup Screen III Fixed
Ports Setup Screen III DHCP