User manual

2-3
Getting Started
Charging the Battery
Charging the Battery
Before using the battery pack to power the analyzer for any length of
time, it must be fully charged. Connect the analyzer to a live AC outlet
using the AC adapter and power cable.
The battery pack can be charged with the analyzer turned on or off.
Charging time is reduced if the analyzer is turned off. With the analyzer
turned on, the Status indicator and Battery symbol on the display provides
the charge status of the battery pack.
For more information on the Status indicators and the Battery icon, see
Status indicators on page 2-6 and Battery symbol on page 2-8.
To connect AC power to analyzer:
Connect the power cable to the AC adapter.
Plug the AC adapter into the analyzer’s External Power jack.
Connect the power cable to a live AC outlet.
AC adapter and power cable
DANGER: To avoid electric shock, never modify, forcibly bend, damage,
apply heat to or place heavy objects on top of power cord. If power cable
becomes damaged or plug overheats, discontinue use.
Never remove the power plug from the outlet with wet hands.
CAUTION: Using the wrong AC adapter could damage your analyzer.
Psiber assumes no liability for damage in such cases.
Never pull directly on the power cable to unplug it. Hold the power plug
when removing the cable from the outlet.
Chapter 2