User manual

Recall Internal Data
Select the internal number field to enter the saved data number. This is
where you saved the data under Analyze Network. Press ENTER to return
back to the RECALL screen. Press RECALL to find the data.
If the saved number location is valid then the screen information will be
displayed. This will look identical to the analyze network button except no
new information is being filled in. Select the buttons to navigate to the
saved data. Press the EXIT button to get back to the RECALL screen.
If the saved number location is not valid then a message is displayed
above the RECALL button saying INVALID DATA. Enter a new saved data
number or press EXIT to get back to the HOME screen.
8-2
Recall Saved Data
Recall Screen
Print Recalled Data
Select Remote Access in the Operating Mode buttons on the bottom of
the screen to display the LANEXPERT‘S IP address. Enter this IP
address into the LANEXPERT Console Application. Press the Screen
Capture tab to Print saved screens.
Chapter 8
Recall Screen
NOTE: Note- the Mode screen graphic in the upper left corner is the
Recall symbol and not the Analyze network symbol.