User manual

6-4

Chapter 6

Cable Test

Wiremap

WIREMAP verifies proper cable wiring and detects split pairs. Connect the

Wiremap Terminator to the cable under test prior to selecting START. Select

START to run the test.

If the Wiremap Terminator in not connected all pairs will display OPEN and a

message appears saying <NO TERMINATOR FOUND>. If an error is found the

incorrect numbers display in red on the right and a message is displayed

inbetween the colored wires.

NOTE: Select another Test button visible on the screen or by scrolling to

the right or left with the white arrows or select the Exit button.

Warning: Cable test is ONLY performed on Port 2. Do not connect

anything into Port 1 while performing cable tests. Psiber is not

liable for misuse of these ports.

Example - Good cable Example - Split Pair on

12-36

Example - Crossed 12-36

cable

Example - Crossed 12-36

shielded cable