User manual

LAN Connections Interface Connections
10/100/1000BaseT
Port with Cable Test
(Port 2)
10/100/1000BaseT
Port
(Port 1)
USB A Port USB B Port
External
Power
Status
Indicators
Color LCD
Touch-
screen
Display
Power
Button
Power - shows battery and external power
status.
Green - Battery has more than 25%
charge.
Red - Battery has less than 25% charge.
Orange - External power connected.
Port 1 and Port 2 - shows the status of each port
when it is connected.
Green - connected at 1 Gbit
Orange - connected at 100Mbit
Red - connected at 10Mbit
Flashing Red - trying to link.
Off - not trying to Link or is not linked.
Activity - shows network activity on either port
when the LANEXPERT receives a frame.
Green indicates a good frame is
detected
Red indicates a bad frame is detected.
Note: When monitoring heavy network
traffic the Activity Indicator appears to
stay on continuously.
Stylus
LANEXPERT Overview
Status Indicators
Wrist Strap
Connector
2
7
Installing the LANEXPERT Console Program and
User Guide
Included with the LANEXPERT is a USB Flash Drive that contains the User Guide and the
LANEXPERT Console Program. The Console program allows a computer to monitor, capture
and print LANEXPERT screens and update the LANEXPERT firmware when new revisions
are available. Installing the LanExpert Console Application:
Plug the Flash Drive into a USB port on the computer.
Please note that the Microsoft .NET Framework version 3.5 must be installed prior to installing
the LANEXPERT Console Application.
The .NET framework can be installed by opening the APPLICATION folder on the USB drive
and clicking on doNetFx35setup.exe. The computer will need to be connected to the Internet
for the installation process. After the install, the computer may need to be rebooted.
Install the LANEXPERT Console Application by opening the APPLICATION folder on the USB
Drive and clicking on LanExpertInstaller.exe. The LANEXPERT Installer will install both
Wireshark and the Console Application.