User's Manual

Edge Lite User Manual
1. Introduction
The Softhard.io Edge Series devices allow you to deploy Internet of Things networks in an
easy and scalable way, ensuring minimum maintenance costs. The device consists of a
robust waterproof enclosure with specic external sockets to connect dierent types of
sensors. It has been specially designed to be scalable, easy to deploy and maintain. Be-
sides, it equips with built in M2M modules such as LoRa, NB-IoT or Sigfox interfaces. It
sends temperature, humidity, g-sensor data via the M2M bridge.
1.1 Features
 Robust waterproof IP65 enclosure
 Add or change a sensor probe in seconds
 Powered with internal 18650 Li-ion batteries
 Radios available: NB-IoT Band 3 (~1800MHz), Band 8 (~900MHz), B12 (700MHz,
channel, 23178 test)
 Output power B12 is: 14~15 dBm
 Built-in sensors: 3-axes accelerometer, temperature and humidity sensor, battery
level
 External interface: digital input, digital output and I2C
 MicroSD connector
 SPI ash
 Buzzer
 Status LEDs
 GPS receiver (Optional)
 BLE receiver (Optional)
 Size: 133mm x 68mm x 50mm
1.2 Models
Model P/N
Edge Lite with NB-IoT SHIO-EL-NB
Edge Lite with LoRaWAN SHIO-EL-LO
Edge Lite with SIgFox SHIO-EL-SF
Note: LoRaWan, GPS and BLE are optional features and all related components are not
installed by default.