Operation Manual

Recharging the Battery

Before using the machine, set the main power switch on the machine off, remove the battery, and recharge the battery in the

charger.

When replacing with a fully charged battery, check that the Secondary battery power button (⇒see “Secondary battery power

button”) is off, and that no error for low battery level appears on the touch display (⇒see “Touch Display”).

 As a safety precaution, always use both hands when removing/installing the battery or inserting/removing it fro m the

charger. Doing so with only one hand may allow it to drop, which is very dangerous.

Connect the power cable for the charger to the charger, and connect the power plug to an outlet

Press the main power switch (I/O) to set it off (O)