Operation Manual

73
 Notification Pager Functions & Usage
 When the machine detects danger or detects an obstacle, an alert will be displayed on the notification pager(⇒see "Alert display
and its notification timing")and it notifies the operator by emitting an alert and vibrating. It emits an alert and vibrates for 15
seconds then stops for 5 seconds, which it repeats for 10 minutes. After the error with the machine has been resolved, the
notification pager sounds for 1 second and its display indicates standby.
 To receive alert notifications, pair the machine and the notification pager. (⇒see "Pairing the Notification Pager") Once the
display on the notification pager indicates communication, place it in the pager compartment to complete pairing.
 During autonomous cleaning, always carry the notification pager on you. Alerts cannot be received while the no tification
pager is in the pager compartment.
 The range in which the notification pager can communicate with the machine is a direct line up to 300 m (2 floo rs above
and below).
* Range of communication depends on the environment. Communication may not be possible such as where th ere are
walls with metal.
 After using the notification pager, place it in the notification pager charger (⇒see “Recharging the Notification Pager”).
 If the notification pager won't be used for a long period of time (approx. 2 months) turn the switch Off (
⇒
see "T urning the
Notification Pager On/Off")