Operation Manual

Use the steering handle to move the machine, and clean the entire cleaning route (teaching route)

 Changing between normal mode and max power mode (⇒see “Max Power Mode Button”) is also learned in a cleaning route.

 Teaching a cleaning route with few detours allows the machine to travel with fewer decreases in speed for more efficient

cleaning.

 The speed at which the machine travels as you are cleaning along the cleaning route (teaching route) has no effect on automatic

travel. Clean at your own pace, stopping to check the cleaning route, etc. as needed.

 Be sure to move the machine forward. Backward movement is not learned in a cleaning route. Do not lift the machine up from the

floor while teaching a cleaning route.

 Do not abruptly stop other than for an emergency. Suddenly turning the machine or changing directions while teaching a cleaning

route may affect creation of the cleaning route. Make sure the machine travels in as straight a direction as possible.

 To cancel cleaning route creation, pause the machine, and on the touch display, tap “CANCEL ROUTE”

→

“YES

- CANCEL”.

Return to the Home Location Code that was read at step 5

Read the Home Location Code again

On the touch display, tap “SCAN/SAVE”

The cleaning route is saved.

 The saved route appears in the “RUN ROUTE” menu.