SDS

The Dial Corporation, a Henkel Company; 7201 E. Henkel Way; Scottsdale, AZ 85255-9672
Hard Surface Cleaner
Page 3 of 6
7. HANDLING AND STORAGE
Precautions for safe handling
Do not get in eyes, on skin, on clothing. Do not take internally. Use with adequate ventilation. Keep the containers closed when not in use. Have
emergency equipment (for fires, spills, leaks, etc.) readily available.
Conditions for safe storage, including any incompatibilities
Store in a cool, dry, ventilated area out of reach of children and away from sources of heat, moisture, and incompatible substances. Storage areas for
large quantities (warehouse) should be well ventilated. Keep the containers tightly closed when not in use.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
OSHA permissible exposure limit (PEL), American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV),
and any other exposure limit used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet,
where available.
Hazardous Component(s)
ACGIH
OSHA PEL
AIHA WEEL
OTHER
Limestone
10 mg/m3 TWA Total dust.
5 mg/m3 PEL Respirable fraction.
15 mg/m3 PEL Total dust.
None
None
Boehmite (Al(OH)O)
1 mg/m3 TWA Respirable
fraction.
None
None
None
Sodium hypochlorite
None
None
2 mg/m3 STEL
None
Appropriate engineering controls
Provide local exhaust or general dilution ventilation to keep exposure to airborne contaminants below the permissible exposure limits where mists or
vapors may be generated. Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-
pressure mode.
Individual protection measures
Respiratory: Air contamination monitoring should be carried out where mists or vapors are likely to be generated, to assure that the
employees are not exposed to airborne contaminants above the permissible exposure limits.
Eye: Splash-proof safety glasses are required to prevent eye contact where splashing of product may occur.
Hand/Body: Protective gloves are required where repeated or prolonged skin contact may occur.
Protective clothing is required where repeated or prolonged skin contact may occur.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: cream, white
Odor: characteristic
Odor threshold: Not available.
pH: 12.7 (25 °C)
Melting point/ range: Not available.
Boiling point/range: Not available.
Flash point: > 93.3 °C (> 199.94 °F)
Evaporation rate: Not available.
Flammable/Explosive limits - lower: Not available.
Flammable/Explosive limits - upper: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Solubility in water: Not available.
Partition coefficient (n-octanol/water): Not available.
Autoignition temperature: Not available.
Decomposition temperature: Not available.
Viscosity: 5,000 - 12,000 mPa.s
VOC content: Not available.
Specific gravity: 1.3 (25°C, 77°F)
10. STABILITY AND REACTIVITY
Reactivity: This product reacts with acids.
Chemical stability: Stable under normal ambient temperature (70°F, 21°C) and pressure (1 atm).
Possibility of hazardous reactions: Hazardous polymerization has not been reported to occur under normal temperatures and pressures.
Conditions to avoid: Avoid storing in direct sunlight and avoid extremes of temperature.