User Guide Manual

SPM - PLL User’s Manual
4
1 Specifications
The GXSM software for the SPM controller (model Mk3) includes a PLL module. However, the SPM
controller (model Mk3) can be used as a stand alone PLL when using the PC software described in this
document. The next figures present the front and the back of the SPM controller (model Mk3):
1.1 Power Supply
The PLL works with an external 5V (+-5%) power pack.
1.2 USB
The PLL is controlled by a Windows PC through a USB connection. The high-speed USB 2.0 PC
link provides a throughput in excess of 35 Mb/s in the read and write directions.
1.3 Analog Inputs
Number of Inputs: 1
Resolution: 16 bits
Raw Noise Figure: 300 µV RMS
Sampling Rate: 150 kHz
Analog Input Bandwidth: 0 to 10 MHz (includes DC)
Input Type: Single Ended
Input Leakage: +-1 µA max
Anti-Aliasing Filter: None
Dynamic Range: +-10V
Group-Delay: 2 samples