Owner's manual

7
4 Software Mode
The Data Logger software will run in a different mode depending of the hardware it is running on.
Depending of hardware used, the look and functionalities will be slightly different at launch. The
following table enumerates the differences. Unless otherwise noted, this document relates to the
software used with the Concerto hardware.
Concerto hardware
Other hardware: Itrack, Alto-6ch
Panel Size
800x480 pixels
800x600 pixels
Position of the menu bar
Bottom of panel
Top of panel
Number of inputs managed
4
6
Touch screen functions
Yes
No
Output generation
Embedded generator
Embedded generator or wave file
Post-Processing
Limited (Rec Viewer &
Playback)2
Full
2
Post-Processing functions are disabled on the Concerto hardware because the unit is intended for acquisition.
The advanced post-analysis of the acquired data should take place on a PC.