User's Manual Part 2

Setting Up Remote VPN Access for Users
252 Check Point Safe@Office User Guide
Setting Up Remote VPN Access for
Users
are using your Safe@Office appliance as a Remote Access VPN
, you can allow users to access it remotel
If you
Server y through their Remote
Access VPN Clients (a Check Point SecureClient, Check Point SecuRemote,
or another Embedded NG appliance).
To set up remote VPN access for a user
1. Enable your Remote Access VPN Server, using the procedure
Setting Up Your Safe@Office Appliance as a Remote Access VPN
Server on page 204.
2. Add the user to the system, using the procedure Adding Users on
page 248. You must select the VPN Remote Access option.
Note: When using Safe@Office 105, there is only one pre-defined u
called ‘admin’, and you cannot create additional users.
ser
Using RADIUS Authentication
You can use RADIUS to authenticate both Safe@Office appliance users and
Remote Access VPN Clients trying to connect to the Safe@Office appliance.
When a user accesses the Safe@Office Portal and tries to log on, the
Safe@Office appliance sends the entered user name and password to the
RADIUS server. The server then checks whether the RADIUS database
contains a matching user name and password pair. If so, then the user is
logged on.