User's Manual Part 2

Viewing VPN Tunnels
Chapter 10: Working With VPNs 243
This field… Displays…
The security protocol (IPSec), the type of encryption
used to secure the connection, and the type of
Message Authentication Code (MAC) used to verify the
integrity of the message.
This information is presented in the following format:
Security protocol: Encryption type/Authentication type
Note: All VPN settings are automatically negotiated
between the two sites. The encryption and
strongest of those used at the two sites.
DES encryption schemes, and MD5 and SHA
authentication schemes.
authentication schemes used for the connection are the
Your Safe@Office appliance supports AES, 3DES, and
The name and IP address of the VPN gateway to which
the tunnel is connected.
U
D
ted in the format hh:mm:ss,
where:
s
ser The user logged on to the VPN site.
uration The time at which the tunnel was established.
This information is presen
hh=hours
mm=minutes
ss=second