User's Manual Part 1

Using Internet Setup
Chapter 4: Configuring the Internet Connection 83
In this field… Do this…
Shap
D
Rate
option to enable Traffic Shaper for
ts/second)
slightly lower than your Internet connection's
d nstream speed in the field
different rates in order to
w s.
cannot control the number or
he Internet; it can
raffic by dropping
received packets. This makes the shaping of
inbound traffic less accurate than the shaping of
outbound traffic. It is therefore recommended to
n on using Traffic Shaper, see Using
e
Select this
ownstream: Link
incoming traffic. Then type a rate (in kilobi
maximum measured ow
provided.
It is recommended to try
determine hich one provides the best result
Note: Traffic Shaper
type of packets it receives from t
only affect the rate of incoming t
enable traffic shaping for incoming traffic only if
necessary.
For informatio
Traffic Shaper on page 120.
A
E selected PPTP, type the IP address of the
PPTP client as given by your ISP.
If you selected PPPoE, this field is optional, and you
do not have to fill it in unless your ISP has instructed
you to do so.
dvanced
xternal IP If you