User's Manual Part 1

Network Installation
40 Check Point Safe@Office User Guide
Your Safe@Office appliance is all mounted. You can now connect it to
your
Network Installation
1. Verify that you have the correct cable type.
For informa 13.
2. Connect the LAN cable:
• Connect one end of the Ethernet cable to one of the LAN ports at
the back of the unit.
• Con devices.
3. Conne
• Connect one end of the Ethernet cable to the WAN port at the back
of the unit.
• Connect the other end of the cable to a Cable Modem, xDSL
modem or office net
4. Conne WR, at the
back of the Safe@Office appliance. Plug in the AC power adapter to
the wall electrical outlet.
w
computer. See Network Installation on page 40.
tion, see Network Requirements on page
nect the other end to PCs, hubs, or other network
ct the WAN cable:
work.
ct the power adapter to the power socket, labeled P
Warning: The Safe@Office applia ce AC adapter is compatible with
eithe y that the wall
ur power
supply. Failure to observe this warning may result in injuries or damage
to equipment.
n
r 100, 120 or 230 VAC input power. Please verif
outlet voltage is compatible with the voltage specified on yo