User's Manual Part 1

Wall Mounting the Appliance
Chapter 2: Installing and Setting up the Safe@Office Appliance 39
3. Mark two drill holes on the wall, in accordance with the following
sketch:
4. Drill two 3.5 mm diameter holes, approximately 25 mm deep.
5. Insert the two plastic conical anchors you received with your
Safe@Office appliance into the holes.
6. Insert the two screws you received with your Safe@Office
appliance into the plastic conical anchors, and turn them until they
protrude approximately 5 mm from the wall.
7. Align the holes on the Safe@Office appliance's underside with the
screws on the wall, then push the appliance in and down.