User's Manual Part 1

Getting to Know Your Safe@Office 300 Series Appliance
Chapter 1: Introduction 21
Table 5: Safe@Office 300 Appliance Rear Panel Elements
Label Description
PWR A power jack used for supplying power to the unit. Connect
the supplied power adapter to this jack.
RESET A t or
re t ults.
You n
•
•
ets your
the version that shipped with the
Safe@Office appliance. This results in the loss
to the factory default firmware. You will
have to re-configure your Safe@Office
Do not reset the unit without consulting your system
.
COM1
onnecting a
hub when setting up more than one Internet connection
DMZ omputer,
or for a hub when connecting a DMZ network
Local Area Network switch: Four Ethernet ports (RJ-45) used
for connecting computers or other network devices
bu ton used for rebooting the Safe@Office appliance
se ting the Safe@Office appliance to its factory defa
eed to use a pointed object to press this button.
Short press. Reboots the Safe@Office appliance
Long press (7 seconds). Resets the Safe@Office
appliance to its factory defaults, and res
firmware to
of all security services and passwords and
reverting
appliance.
administrator
USB A USB port
A serial port
WAN Wide Area Network: An Ethernet port (RJ-45) used for
connecting your cable or xDSL modem, or for c
A dedicated Ethernet port (RJ-45) used for a DMZ c
LAN 1-4