User's Manual Part 1

Using Traffic Shaper
126 Check Point Safe@Office User Guide
Do In this field… this…
Delay Sensitivity Sele
the
• Low (Bulk Traffic) - Traffic that is not
•
•
highly sensitive to delay. For example,
ick
Traf ith a
lower latency. That is, Traffic Shaper attempts to
sen
befo
ow
ct the degree of precedence to give this class in
transmission queue:
sensitive to long delays. For example,
SMTP traffic (outgoing email).
Medium (Normal Traffic) - Normal traffic
High (Interactive Traffic) - Traffic that is
IP telephony, videoconferencing, and
interactive protocols that require qu
user response, such as telnet.
fic Shaper serves delay-sensitive traffic w
d packets with a "High (Interactive Traffic)" level
re packets with a "Medium (Normal Traffic)" or
"L (Bulk Traffic)" level.
Limit outgoing
traffic rate to
Sele to limit the rate of outgoing traffic
belo ate
(in k ovided.
ximum rate
(in k ) in the field provided.
ct this option
nging to this class. Then type the maximum r
ilobits/second) in the field pr
Limit incoming
traffic rate to
Select this option to limit the rate of incoming traffic
belonging to this class. Then type the ma
ilobits/second